1. Home
  2. Course and Curriculum
  3. Course and Curriculum Approvals
  4. Previous Approval Memos
  5. College of Engineering
  6. The request to revise ETGR 3071 and replace with ETGR 3295 in the CM, Civil ET, Electrical ET, and Fire Safety ET degree programs

The request to revise ETGR 3071 and replace with ETGR 3295 in the CM, Civil ET, Electrical ET, and Fire Safety ET degree programs

Memo Date: 
Monday, February 29, 2016
To: 
College of Engineering
From: 
Office of Academic Affairs
Approved On: February 15, 2016
Approved by: Undergraduate Course and Curriculum Committee
Implementation Date: Summer 2016

Note: Deletions are strikethroughs.  Insertions are underlined.

Catalog Copy

ETGR 3071 - Engineering Technology Professional Seminar

Credit Hours: (1)

Provides an introduction to the department of Engineering Technology, the William States Lee College of Engineering, and UNC Charlotte. Addresses professional issues such as ethics, corporate culture, and team work. Relies heavily on computer usage outside of class.

Other Requirements Satisfied: General Education - Writing in the Disciplines (W)

 

Construction Management, B.S.C.M.

Degree Requirements (4-Year Program)

The Bachelor of Science in Construction Management (BSCM) 4-year degree program consists of 128 credit hours. 

General Education Courses (18 credit hours)

For details on required courses, refer to the General Education program.  Students in this major should plan on taking the following courses that meet general education and major requirements.

Mathematics and Science Foundation Courses (23 credit hours)

Business and Management Foundation Courses (12 credit hours)

Major Courses (69 credit hours)

Note:

*Course must be completed with a grade of C or above.

Restricted Elective Courses (6 credit hours)

Select two 3-credit hour elective courses approved by the Department of Engineering Technology and Construction Management for the respective program.  A list is maintained in and published by the department. 

Degree Total = 128 credit hours

Suggested Curriculum

For a suggested curriculum progression toward completing the major, please see the Academic Plan of Study available online at academics.uncc.edu.

Degree Requirements (2+2-Year Program)

The Bachelor of Science in Construction Management (BSCM) 2+2-year degree program consists of 64 credit hours. 

AAS Degree (64 credit hours)

General Education Courses (12 credit hours)

For details on required courses, refer to the General Education program.  Students in this major should plan on taking the following courses that meet general education and major requirements.

Business and Management Foundation Courses (9 credit hours)

Major Courses (37 credit hours)

Note:

*Course must be completed with a grade of C or above.

Restricted Elective Courses (6 credit hours)

Select two 3-credit hour elective courses approved by the Department of Engineering Technology and Construction Management for the respective program.  A list is maintained in and published by the department. 

Note:

Major Electives are courses approved by the Department of Engineering Technology and Construction Management for the respective program. A list is maintained in and published by the department.

Degree Total = 128 credit hours

Suggested Curriculum

For a suggested curriculum progression toward completing the major, please see the Academic Plan of Study available online at academics.uncc.edu.

 

Civil Engineering Technology, B.S.E.T.

Degree Requirements (4-Year Program)

The BSET in Civil Engineering Technology program consists of 128 credit hours. 

General Education Courses (21 credit hours)

For details on required courses, refer to the General Education program.  Students in this major should plan on taking the following courses that meet general education and major requirements.

Social Science Elective Course

Select one of the following:

Mathematics and Science Foundation Courses (29 credit hours)

Major Courses (71 credit hours)

Note:

*Course must be completed with a grade of C or above.

Restricted Elective Courses (7 credit hours)

  • Major Elective (3)
  • Major Elective (3)
  • Major Elective Lab (1) (W)

Major Electives are courses approved by the Department of Engineering Technology and Construction Management for the respective program.  A list is maintained in and published by the department. 

Degree Total = 128 credit hours

Suggested Curriculum

For a suggested curriculum progression toward completing the major, please see the Academic Plan of Study available online at academics.uncc.edu.

Degree Requirements (2+2-Year Program)

AAS Degree (64 hours)

AAS transfer students from approved programs receive 64 credit hours for the AAS degree; thus, AAS students need only to complete the upper-division portion of the courses listed below and remediate any entrance deficiencies noted upon matriculation. 

General Education Courses (12 credit hours)

Mathematics and Science Foundation Courses (6 credit hours)

Note:

*Transfer students with an AAS may have completed differing science courses at the community college. Generally, AAS transfer students entering the Civil ET programs take Chemistry in the Junior year at UNC Charlotte; however, the following chart provides additional guidance for fulfilling the science requirement at UNC Charlotte:

Transfer Students with an AAS Degree who have previously taken:

Shall Take at UNC Charlotte:

2 semesters of physics and no chemistry

CHEM 1251 with lab

1 semester of physics and 1 semester of chemistry

PHYS 1102 with lab

2 semesters of physics and 1 semester of chemistry

GEOL 1200 with lab

Major Courses (39 Credit hours)

Restricted Elective Courses (7 credit hours)

  • Major Electives (7)
  • Major Elective (3)
  • Major Elective Lab (1) (W)

Major Electives are courses approved by the Department of Engineering Technology and Construction Management for the respective program.  A list is maintained in and published by the department. 

Degree Total = 128 credit hours

Suggested Curriculum

For a suggested curriculum progression toward completing the major, please see the Academic Plan of Study available online at academics.uncc.edu.

 

Electrical Engineering Technology, B.S.E.T.

Degree Requirements (4-Year Program)

The BSET in Electrical Engineering Technology program consists of 128 credit hours. 

General Education Courses (21 credit hours)

For details on required courses, refer to the General Education program.  Students in this major should plan on taking the following courses that meet general education and major requirements.

Social Science Elective Course

Select one of the following:

Mathematics and Science Foundation Courses (26 credit hours)

Major Courses (75 credit hours)

Note:

*Course must be completed with a grade of C or above.

Restricted Elective Courses (6 credit hours)

Select two 3-credit courses approved by the Department of Engineering Technology and Construction Management for the respective program.  A list is maintained in and published by the department. 

Degree Total = 128 credit hours

Degree Requirements (2+2-Year Program)

The BSET in Electrical Engineering Technology program consists of 128 credit hours. 

AAS Degree (64 credit hours)

AAS transfer students from approved programs receive 64 credit hours for the AAS degree; thus, AAS students need only to complete the upper-division portion of the courses listed below and remediate any entrance deficiencies noted upon matriculation. 

General Education Courses (12 credit hours)

Mathematics and Science Foundation Courses (6 credit hours)

Note:

*Transfer students with an AAS may have completed differing science courses at the community college. Generally, AAS transfer students entering the Electrical ET programs take Chemistry in the Junior year at UNC Charlotte; however, the following chart provides additional guidance for fulfilling the science requirement at UNC Charlotte:

Transfer Students with an AAS Degree who have previously taken:

Shall Take at UNC Charlotte:

2 semesters of physics with lab and no chemistry

CHEM 1251

1 semester of physics with lab and 1 semester of chemistry

PHYS 1102 with lab

2 semesters of physics with lab and 1 semester of chemistry

GEOL 1200, BIOL 1110, PHYS 1130, or CHEM 1252

Major Courses (40 credit hours)

Note:

*Course must be completed with a grade of C or above.

Restricted Elective Courses (6 credit hours)

Select two 3-credit hour courses approved by the Department of Engineering Technology and Construction Management for the respective program.  A list is maintained in and published by the department. 

Degree Total = 128 credit hours

 

Fire Safety Engineering Technology, Fire Protection Concentration, B.S.E.T.

Degree Requirements (4-Year Program)

The BSET in Fire Safety Engineering Technology with a Concentration in Fire Protection program consists of 125 credit hours. 

General Education Courses (21 credit hours)

For details on required courses, refer to the General Education program.  Students in this major should plan on taking the following courses that meet general education and major requirements.

Social Science Elective Course

Select one of the following:

Mathematics and Science Foundation Courses (26 credit hours)

Major Courses (73 credit hours)

Note:

*Course must be completed with a grade of C or above.

Restricted Elective Courses (5 credit hours)

Select two courses with a minimum of 5 credit hours approved by the Department of Engineering Technology and Construction Management for the respective program.  A list is maintained in and published by the department.

Degree Total = 125 credit hours

Degree Requirements (2+2-Year Program)

The BSET in Fire Safety Engineering Technology with a Concentration in Fire Protection program consists of 125 credit hours. 

AAS Degree (64 credit hours)

AAS transfer students from approved programs receive 64 credit hours for the AAS degree; thus, AAS students need only to complete the upper-division portion of the courses listed below and remediate any entrance deficiencies noted upon matriculation. 

General Education Courses (6 credit hours)

Mathematics and Science Foundation Courses (9 credit hours)

Major Courses (43 credit hours)

Restricted Elective Course (3 credit hours)

Select one 3-credit course approved by the Department of Engineering Technology and Construction Management for the respective program.  A list is maintained in and published by the department. 

Degree Total = 125 credit hours

Suggested Curriculum

For a suggested curriculum progression toward completing the major, please see the Academic Plan of Study available online at academics.uncc.edu.

 

Fire Safety Engineering Technology, Fire Safety Concentration, B.S.E.T.

Degree Requirements (4-Year Program)

The BSET in Fire Safety Engineering Technology with a Concentration in Fire Safety program consists of 125 credit hours. 

General Education Courses (21 credit hours)

For details on required courses, refer to the General Education program.  Students in this major should plan on taking the following courses that meet general education and major requirements.

Social Science Elective Course

Select one of the following:

Mathematics and Science Foundation Courses (17 credit hours)

Major Courses (76 credit hours)

Note:

*Course must be completed with a grade of C or above.

Restricted Elective Courses (11 credit hours)

Select elective courses approved by the Department of Engineering Technology and Construction Management for the respective program.  A list is maintained in and published by the department. 

Degree Total = 125 credit hours

Degree Requirements (2+2-Year Program)

The BSET in Fire Safety Engineering Technology with a Concentration in Fire Safety program consists of 125 credit hours. 

AAS Degree (64 credit hours)

AAS transfer students from approved programs receive 64 credit hours for the AAS degree; thus, AAS students need only to complete the upper-division portion of the courses listed below and remediate any entrance deficiencies noted upon matriculation. 

General Education Courses (6 credit hours)

Mathematics and Science Foundation Course (3 credit hours)

Major Courses (43 credit hours)

Restricted Elective Courses (9 credit hours)

Select three 3-hour courses approved by the Department of Engineering Technology and Construction Management for the respective program.  A list is maintained in and published by the department. 

Degree Total = 125 credit hours

Suggested Curriculum

For a suggested curriculum progression toward completing the major, please see the Academic Plan of Study available online at academics.uncc.edu.